Kids Kilts

Now that you have created patterns to make your porcelain doll dress, you can add a deck to improve its way. Aprons are relatively simple to do. You will need equipment, including 6 inches of light colored plain-woven fabrics (Batiste) to make your deck. You will also need lace, about 3 / 8 inch with edges shrunk. In addition, you will need son DMC white poly-cotton white embroidery thread, fabric glue and spray, DMC embroidery thread (pink and green 818-pink 524-green) and studs for your deck. (OOO-Chips)

Now that you have your articles, you can start making your deck. You can either buy lace or design your own borders. In this case, we will do the edges, such as scallops and ruffles.

You will need brown paper and pencil to draw your deck model. Once you've followed the route, cut. Use your spray stabilizer on the bottom edges of untreated spray about 2 inches, and let dry. Press your fabric stiff. Now, start to sew a fabric edge or an ornament on your fabric undulate. (Scallops) You want to sew along the bottom edge untreated. Then, in parallel with the distance to sew in your skirt. Leave 1 / 2 inch or 1 inch opening on the right side of your "crowbar." Avoid sewing too near the edges untreated.

TIP: If you use a sewing machine, use your settings to form the method of scallops.

Then use your fabric glue and run the length of the outer edge of your template. Let the glue dry, then trim the excess tissue with scissors to fit boats. Cut another length of 15 inches of your fabric and another 4 inches in width. You are now ready to begin your sewing ruffles. Sew your scallop embroidery on the edges after completing treatment, to assemble the edges so that zigzags. You are connecting seams on the back of the dowry and hem. Gather your stitches, to perform online and crown. To create the edge of your apron, cut all the side lengths.

Apron to be created in several ways, which include cutting the straps "and by the size sketch or drawing. You still want to roam along the edges for sewing lace. Continue stitching at the edges to the middle of rear and right edges closer together to open the deck in the middle of the back. Now you can fold the lace, the press and add a few lines while collecting the stitches near the edges of the crown of your kilt. Gather and pull up the kilt-equipped to face the gathering at the waist and compare the before-East and the notch. Make sure the area is still present. Stitch together and brush the joints, while using the method intersect to complete your task.

Then cut the flying shoulder in a straight line along the trend of sewing the edges of fabric. (Scallops) Now take your points, collect and run a few lines along the curved edge of your shoulder ruffles. Between the notches on your shoulder scrap, place your edges and filled them even as you sew the seam lines and trim. Now fold along the line straps folded. Press your model and transform it so that it falls under the edges untreated. Then, sewing items hidden under the strap, the preparation of the seams of your flying. Straps can now go on the belt, which should compare the notches. Before completing your task, to compare the straps to your doll make sure it fits, then finish your sewing.